Teltonika

Teltonika Networks is a Lithuanian manufacturer specialising in industrial cellular and Ethernet connectivity, and it holds one of the largest connectivity ranges on rugged.co.uk with more than fifty products. The portfolio is unusually broad: RUT and RUTX cellular routers, RUTM and 5G models, TRB industrial gateways, TRM cellular modems, TSW Ethernet switches and TAP Wi-Fi access points. Most devices run RutOS, an OpenWrt-based Linux operating system, and are managed centrally through the Teltonika Remote Management System (RMS). The line spans entry-level 4G units through to 5G Sub-6 GHz routers, giving buyers a single ecosystem for routing, gateway, switching and wireless needs. Specifications differ widely across families, so confirm bands, ports and ratings on each product page.

Many Teltonika routers are built for demanding industrial use, though ruggedness varies by model. The RUT956, for example, uses a rugged aluminium housing rated IP30 against dust and debris, carries MIL-STD-810H vibration compliance, and operates across a wide -40 C to 75 C range. The 5G RUTX50 shares the aluminium IP30 build, the same wide temperature range and MIL-STD electromagnetic compatibility, with surge-protected 9 to 50 VDC input. Features such as DIN-rail mounting, wide-input DC power and reinforced casings are common across the industrial lines. That said, some models, including certain RUTM units, are rated non-rugged, so do not assume a uniform standard. Always verify the IP rating, temperature range and MIL-STD compliance on the specific product page before specifying.

RutOS is Teltonika’s OpenWrt-based Linux operating system that runs across its router, gateway and modem range, providing routing, firewall, VPN and extensive protocol support along with a package manager for adding software. The Teltonika Remote Management System (RMS) is the cloud platform that sits above it, allowing remote configuration, monitoring, firmware updates and bulk device control across a fleet from one place. Together they let operators deploy and maintain large numbers of devices without site visits, with firmware-over-the-air updates and configuration profiles. RutOS also supports SDK development, custom branded firmware and integrations with platforms such as Azure IoT Hub, Cumulocity and ThingWorx. The exact feature set depends on the device and firmware version, so confirm details on the relevant product page.

Yes. Teltonika’s range includes several 5G Sub-6 GHz devices alongside its extensive 4G LTE line. The RUTX50 industrial router supports 5G SA and NSA with download speeds up to around 3.3 Gbps via 4×4 MIMO, with fallback to 4G LTE Cat 20 and 3G, plus dual-band Wi-Fi and five Gigabit Ethernet ports. The RUTM50 5G router reaches up to 3.4 Gbps using 4×4 MIMO, while the TRM500 brings 5G into a compact USB Type-C modem rated IP30. There is also the TRB500 5G industrial gateway for embedded and IoT use. Most pair 5G with dual SIM auto-failover for resilience. As band support, 3GPP release and throughput differ by model and hardware version, confirm the specification on the individual product page.

Teltonika’s TSW range extends its connectivity ecosystem into wired networking, covering unmanaged and managed Ethernet switches, PoE+ models and DIN-rail units. The TSW200, for instance, provides eight Gigabit PoE+ ports delivering up to 30 W per port within a 240 W budget, plus two SFP fibre ports, all in a full aluminium IP30 housing rated for -40 C to 75 C operation. It supports IEEE 802.3af and 802.3at PoE, jumbo frames up to 9216 bytes and a 20 Gbps non-blocking backplane. Buyers often choose Teltonika switches to keep routing, switching and gateway hardware within one vendor ecosystem and management approach. Port counts, PoE budgets, management capability and temperature ranges vary across the TSW line, so confirm the details on the specific product page.

Teltonika uses model prefixes to signal device class. RUT covers core industrial cellular and Ethernet routers, with RUTX denoting higher-specification routers featuring Gigabit Ethernet, dual-band Wi-Fi and, in the RUTX50, 5G. RUTM is a newer router line that includes 5G models such as the RUTM50. TRB designates compact industrial gateways, often single-purpose units for LTE, GPIO, RS232, RS485, M-Bus, NB-IoT or 5G connectivity. TRM identifies industrial cellular modems, including the 5G TRM500 with USB Type-C. TSW are Ethernet switches and TAP are Wi-Fi access points. This naming makes it easier to scope a build, but capabilities, bands and ruggedness still vary within each family, so confirm the exact specification on the relevant product page before ordering.

Resilience is a core design theme across Teltonika’s cellular range. Most routers, including the RUT956, RUTX50 and RUTM50, support dual SIM cards with automatic switching triggered by conditions such as weak signal, data limits, roaming, no network or connection failure, with SIM idle protection to avoid unnecessary data use. Beyond cellular, devices offer multiple WAN backup options across Wi-Fi WAN, mobile, VRRP and wired links, each usable for automatic failover, plus load balancing to spread traffic over several connections. VPN support spans IPsec, OpenVPN, WireGuard and more for secure tunnels, and connection monitoring with ping or periodic reboot keeps links healthy. The precise failover and VPN feature set depends on the model and firmware, so verify on the individual product page.

Teltonika devices on rugged.co.uk recur across energy and utilities, industrial manufacturing, logistics and supply chain, rail and transport, marine and offshore, oil and gas, natural resources and mining, defence and emergency services. Typical applications include SCADA and control-room access, fleet management and telematics, process control and shop-floor monitoring, industrial HMI, asset tracking and secure communications. The breadth of the range, from compact TRB gateways through RUT and RUTX routers to 5G RUTM and RUTX50 units, TSW switches and TAP access points, means a single vendor can address routing, gateway, switching and wireless needs across these sectors. As ratings and certifications such as IP30 and MIL-STD-810H are model-specific, match each device to its operating environment and confirm on the product page.