WORLDS BEST RUGGED PRODUCTS
OEM & CUSTOM SOLUTIONS
FAST TURNAROUND
WORLDWIDE SHIPPING
930-DJI-RONIN MIL-STD-810F 930-DJI-RONIN ATA-300 930-DJI-RONIN ASTM-D4169 930-DJI-RONIN IP67-RATED 930-DJI-RONIN ANTI-SCRATCH-SURFACE 930-DJI-RONIN WATER-RESISTANCE 930-DJI-RONIN DUST-RESISTANCE 930-DJI-RONIN CUSTOMISABLE


Nanuk-923-DJI-RONIN-Rugged Case

NANUK 923 FOR DJI RONIN-S

Nanuk-945-ZCRANE3-Rugged Case

NANUK 945 FOR ZHIYUN CRANE3 LAB

NANUK 930 FOR DJI RONIN-S | SC

Your DJI™ Ronin-S | SC gimbal gets the maximum level of protection with this protective case. The foam is pre-cut for your Ronin-S | SC and the smart design ensures all the delicate parts remain in place and properly organized.

930-DJI-RONIN Features

  • Impact Resistant Protective Case
  • Made From NK-7 Resin Material
  • Waterproof & Dustproof
  • Lightweight
  • PowerClaw Latching System

930-DJI-RONIN Rugged Case Options



Shoot Ready

Built to organize, protect, carry and survive tough conditions, the NANUK 930 waterproof hard case is impenetrable and indestructible with a lightweight tough NK-7 resin shell and PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.

Your DJI™ Ronin-S | SC gimbal gets the maximum level of protection with this protective case.

The foam is pre-cut for your Ronin-S | SC and the smart design ensures all the delicate parts remain in place and properly organized. It offers compartmentalized protection for either a Ronin S or Ronin SC gimbal with BG18 battery/grip attached, extended grip/mini tripod, quick release camera plate, one (1) BG18 battery grip detached, camera riser, focus motor with wheel and rod mount, smartphone holder, the precision accessories and charging accessories. Videographers and photographers trust NANUK to protect their most valuable gear. Your Ronin-S | SC gimbal stores full assembled so it’s ready to use in seconds.

The NANUK 930 For DJI™ Ronin-S | SC protective case comes with a soft grip and ergonomic handle to make it easy to transport.

It also features stainless steel hardware and integrated handle stay to keep the handle out of harm when travelling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight.

This MIL-Spec injection moulded case is backed by a lifetime warranty.

Specification
Manufacturer or Brand Nanuk
IP Rating IP67
Housing Colour Black, Silver, Graphite, Olive, Yellow, Orange
Certifications Waterproof IPX7, Dustproof IP6X, ATA 300-CAT 1, ASTM D-4169-DC-18 (Drop, Vibration & Rainfall), MIL-STD-810F(Imersion), RoHs
Operating Temperature Min -20 Degrees F (-29 Degrees C ) Max 140 Degrees F (60 Degrees C)
Storage Temperature Min -20 Degrees F (-29 Degrees C ) Max 140 Degrees F (60 Degrees C)
Shock ASTM D-4169 DC-18 - VIBRATION
Dimensions L19.8" W16.0" H7.6"L503mm W406mm H193mm
Warranty Conditional Lifetime Guarantee
Series LARGE
Interior Dimensions (L x W x H) L18.0" W13.0" H6.9"L457mm W330mm H175mm
Exterior dimensions (L x W x H) L19.8" W16.0" H7.6"L503mm W406mm H193mm
Lid Depth 2.1" | 53mm
Base Depth 4.8" | 121mm
Case Material NK-7 Resin
Internal Volume 0.93 cu.ft (26.3 L)
Max Buoyancy 65 lb | 29.5 kg
Temperature Rating Min -20 Degrees F (-29 Degrees C ) Max 140 Degrees F (60 Degrees C)
Water Resistant Yes, Water Resistant (IP67)
Airline Check-in Yes
Airline Cabin Carry-on Yes

No Related Posts

  • Impact Resistant Protective Case
  • Made From NK-7 Resin Material
  • Waterproof & Dustproof
  • Lightweight
  • PowerClaw Latching System
  • Optional Cubed Foam Interior
  • Choice of Colours
  • Fully Custom Internal Panels
  • Military Approved
  • Lifetime Warranty
The Nanuk 930-DJI-RONIN is used in a wide range of industries for a broad range of rugged applications. The most common applications for the Nanuk 930-DJI-RONIN Rugged Case are listed below:-

  • Computer Consoles
  • Marine Consoles
  • Medical Consoles
  • Miltary Consoles
  • Mobile Worker

These are just some of the applications for the Nanuk 930-DJI-RONIN Rugged Case The potential applications extend further than those shown above. For further information about the Nanuk 930-DJI-RONIN Rugged Case or to check if the product is suitable for your application, please do not hesitate to contact us.
We take pride in our highly skilled in-house technical team and our strong relationships with manufacturers. Together, we are well-equipped to provide you with an array of options and configurations for the Nanuk 930-DJI-RONIN Rugged Case to suit your requirements. These options include:

  • Custom Logo
  • Case Colour
  • Laser Etching
  • Custom Internal Panels
  • Custom Printing
  • Custom Foam Interior

If your application requires unusual or individual modifications not listed above for the Nanuk 930-DJI-RONIN Rugged Case, please contact us with your exact requirements and we will help create a custom solution to meet your needs.

The Nanuk 930-DJI-RONIN Rugged Case has a Conditional Lifetime Guarantee against defects in workmanship and materials from the date of shipment, (unless otherwise agreed in writing)

To obtain service under this warranty, the warranty-eligible product, Nanuk 930-DJI-RONIN Rugged Case, must be presented to us here in the UK.

For further information on the above or for repairs and service outside the the scope of warranty, please visit the warranty section of our webiste.