Opens in a new tab

Rugged Trackballs

An industrial trackball is a pointing device in which the user rolls a ball to move the cursor, so the unit stays fixed and can be sealed into a panel. Common ball diameters are about 25, 38 and 50 mm. Trackballs work well with gloves, in vibration and in washdown areas, provided the sealing rating covers the whole assembly.

74 products
    • IP65 dust and water resistant
    • Impact-resistant ABS polycarbonate housing
    • Certified to IEC 60945 and CE standards
    • Patented optical sensors with hall-effect scroll wheel
    Cursor Controls E38-Desktop Trackball

    E38-Desktop-Standard

    • IP65 dust and water ingress protection
    • Sealed ABS polycarbonate housing
    • Hall-effect scroll wheel for precision
    • CE and RoHS compliant, industrial grade
    Cursor Controls E38-Desktop-Standard Trackball
    • IP65 sealed housing
    • Hall-effect scroll wheel
    • Three-switch design
    • Vibration and impact resistant
    Cursor Controls E38-Panel Trackball
    • Industrial-grade aluminium housing
    • 100% humidity resistant when properly installed
    • Anti-vibration technology for precise control
    • USB and PS/2 interface auto-selection
    Cursor Controls F38-Halo Rugged Trackball
    • Impact-resistant aluminium housing
    • Anti-vibration patented technology
    • Stainless steel shafts and bearings
    • CE and RoHS certified for industrial safety
    Cursor Controls F38-Switch-Module Rugged Trackball

    F38-Switch-Module-Halo

    • Aluminium housing impact resistance
    • Anti-vibration mechanism for stable input
    • Sealed for ingress protection
    • CE and RoHS compliant certification
    Cursor Controls F38-Switch-Module-Halo Rugged Trackball
    • IP68 sealed ball for contamination resistance
    • Modular design supports custom integration
    • Industrial-grade housing with vibration tolerance
    • CE and RoHS certified for durability
    Cursor Controls M-Track Trackball
    • Compact rear-mount design
    • Selectable backlit ball for low-light use
    • Patented dust and moisture seal system
    • Over one million ball revolutions lifetime
    Cursor Controls P25-Compact-Backlit Trackball
    • Compact rear-panel mounting
    • Durable ABS polycarbonate case
    • Sealed design for dust protection
    • Universal USB and PS/2 interface
    Cursor Controls P25-Ultra-Compact Trackball
    • IP68 sealed housing
    • Hall effect technology
    • Over 10 million ball revolutions
    • 200N mechanical load tolerance
    Cursor Controls SWM-RP Scroll Wheel
    • IP68 dust-sealed design
    • Hall effect sensing technology
    • Configurable LED backlight
    • Over 10 million ball revolutions
    Cursor Controls SWM-TP Scroll Wheel
    • IP68-rated sealed housing
    • Solid-state laser tracking engine
    • Over 10 million ball revolutions lifetime
    • Removable top ring for easy cleaning
    Cursor Controls X13 OEM Trackball
    • IP68 sealed for dusty and wet environments
    • Laser tracking with no mechanical wear
    • Removable top ring for easy cleaning
    • CE and RoHS compliant for regulatory use
    Cursor Controls X19 OEM Trackball
    • Sealed laser tracking for durable precision
    • IP68 rated for dust and water resistance
    • Robust ABS polycarbonate housing with rear mount
    • Removable top ring for easy cleaning
    Cursor Controls X25 OEM Trackball
    • Contact-less laser tracking
    • IP68 ingress protection
    • Industrial-grade ABS polycarbonate housing
    • Rear-mountable with detachable top ring
    Cursor Controls X25-Halo OEM Trackball
    • Contactless laser tracking system
    • IP68 dust-sealed and weatherproof housing
    • Removable top ring for easy sterilisation
    • Rear panel mounting for integration
    Cursor Controls X38 OEM Trackball
    • Advanced laser tracking technology
    • IP68 sealing for dust and water resistance
    • Illuminated halo ring for low-light visibility
    • Removable top ring for easy cleaning
    Cursor Controls X38-Halo OEM Trackball
    • IP68 sealed housing
    • Laser tracking technology
    • Rear panel mounting
    • Selectable electrical outputs
    Cursor Controls X50 OEM Trackball
    • IP68 sealed ABS polycarbonate housing
    • Contactless laser sensor for durability
    • Configurable backlighting options
    • Rear mount for secure OEM integration
    Cursor Controls X50-Halo OEM Trackball
    • Contactless laser tracking system
    • Reinforced ABS polycarbonate housing
    • Sealed against dust and contamination
    • Z-axis control wheel for 3D cursor movement
    Cursor Controls Z50 OEM Trackball
    • Contactless optical tracking
    • Robust ABS polycarbonate housing
    • Three-axis control system
    • USB and PS2 auto-detect interface
    Cursor Controls Z50-Slimline OEM Trackball
    • Infra-red optical top-mount tracking
    • Sealing up to IP68
    • Removable top ring for easy cleaning
    • USB & PS/2 or TTL quadrature output
    Cursor Controls X50 Skeletal Optical Trackball
    • NEMA 4X sealed housing
    • Solid-state laser technology
    • MIL-STD shock resistant
    • 100% humidity resistant
    iKey PM-TB Panel Mount Rugged Trackball
    • Advanced laser tracking for longevity
    • Removable top ring for easy cleaning
    • ABS polycarbonate housing for durability
    • 100% humidity resistant when installed
    Cursor Controls C50 Trackball
    • NEMA 4X sealed construction
    • Solid-state sensing for durability
    • Shock resistance to 50g pulses
    • Operates 0-65°C with -40°C storage
    iKey DP-TB-50 Rugged Trackball
  • Having trouble finding what you're looking for?


    Selecting the right product for your specific application and environment can be quite challenging. At Rugged, our team of experts is on hand to assist you in making the best choice. Whether you have questions about product specifications or require guidance through our range of solutions, we’re here to help.

    With our extensive industry knowledge and commitment to quality, we can ensure you find the ideal solution tailored to your needs.

    Let us help you discover the perfect solution, get in touch today for personalised guidance and expert advice.

    Contact Us
  • Selection Guide

    Rugged Trackballs

    At a glance

    • Larger balls give easier, more precise control, especially with gloves; smaller balls save panel space.
    • Optical or magnetic sensing has fewer parts exposed to dirt than an old mechanical roller design.
    • A trackball does not need a desk surface, so it suits panels, rack drawers and vehicle mounts.
    • Check the rating of the whole unit, including the ball seal, buttons and cable.
    • Button layout and whether buttons are separate from the ball affect how usable it is with gloves.

    What is an industrial trackball?

    A trackball is a pointing device that looks like an upside-down mouse. The user rolls an exposed ball with the fingers or palm, and a sensor reads the ball’s movement. Because the housing never moves, an industrial trackball can be fitted into a panel, a keyboard, a rack drawer or a console, and sealed against dust and liquid.

    That fixed position is the main reason engineers choose a trackball over a mouse. It needs no desk surface and no cable to be dragged around, so it suits vibrating vehicles, crowded control panels and areas where the operator is standing.

    When is a trackball the right choice?

    A trackball is a strong fit when one or more of these apply:

    • The operator wears gloves, including thick or insulated ones.
    • The equipment is mounted in a panel, console, vehicle or enclosure.
    • The area is cleaned with water or wipes and the pointing device must be sealed.
    • The operator has limited wrist or arm movement, since only the fingers and hand move.
    • Vibration or motion would make a mouse impossible to use.

    It is less suitable where fast, fine pointing is needed by untrained users, as a trackball takes practice. For a full comparison with touchpads and mice, see trackball vs touchpad vs mouse.

    How do trackball sizes and sensing methods compare?

    Choice Option Strengths Trade-offs
    Ball diameter About 25 mm Compact, saves space Harder with gloves, less leverage
    Ball diameter About 38 mm Balanced size and control Needs a larger cut-out
    Ball diameter About 50 mm Easiest with gloves, smooth long travel Largest footprint
    Sensing Optical or magnetic Few parts exposed to dirt, long life Cost can be higher
    Sensing Mechanical rollers Simple, familiar Rollers can clog and wear
    Mounting Desktop No installation work Needs desk space
    Mounting Panel mount Sealed to the panel, tidy Needs a cut-out and rear clearance
    Mounting Built into keyboard One cable, one footprint Layout is fixed

    Diameters vary by manufacturer, so treat the sizes above as typical and confirm the exact dimension and cut-out on the datasheet.

    How is a trackball sealed?

    The weak point of a trackball is the opening where the ball meets the housing. Industrial designs hold the ball in a retaining ring with a lip or seal so that dust and liquid do not reach the sensor. The buttons, the mounting flange and the cable exit are further seal points. A claimed rating such as IP65 or IP67 only means something if it applies to the complete unit as sold. Read IP ratings explained to see what each digit tests.

    In food, marine and other wet environments, also check the materials. Stainless steel and sealed polymer housings clean more easily than textured plastics, and ask which cleaning chemicals the supplier supports.

    What about gloves and operator comfort?

    Trackballs work with most gloves because the ball is rolled by pushing, not by capacitive touch. A larger ball and well-spaced, raised buttons make it easier to select without lifting the whole hand. If the operator needs to click while rolling, check whether buttons are positioned for left or right hand use, and whether a third button or scroll function is needed. More on this is in keyboards for gloved operation.

    What to check on the datasheet

    • Ball diameter and ball material.
    • Sensing method (optical, magnetic or mechanical).
    • Ingress rating of the complete unit, the standard and the test condition.
    • Operating and storage temperature, listed separately.
    • Panel thickness range, cut-out size, mounting method and rear clearance.
    • Number and layout of buttons and their sealing.
    • Interface (USB, PS/2 or serial) and cable length.
    • Housing material and chemical resistance.

    What to tell us for a quote

    Tell us where the trackball will be fitted, panel thickness, gloves worn, cleaning method, interface on the host, number of buttons and quantity. Many industrial keyboards already include a trackball, so check keyboards with a pointing device and the panel mount installation guide before specifying a separate unit. Our team can advise on formats beyond those shown.

    Request a Quote

    Related guides and ranges

    Frequently asked questions

    What size of trackball should I choose?

    Sizes of about 25 mm, 38 mm and 50 mm are common. Choose a larger ball for gloved hands or fast, coarse movements, and a smaller ball where panel space is tight. Check the cut-out and the clearance behind the panel before you decide.

    Are optical trackballs better than mechanical ones?

    For most industrial use, yes. Optical or magnetic sensing has no rollers to clog, so it copes better with dust, residue and wear. Mechanical designs with rollers can need cleaning. Ask the supplier what sensing method the unit uses and how the ball is sealed.

    Can a trackball be used with gloves?

    Generally yes. A trackball needs a roll of the hand rather than a touch on a capacitive surface, so most glove types work. A larger ball and clearly separated buttons help with thick gloves. Test with the actual gloves where you can.

    Can a trackball be washed down?

    Some can. Look for a high ingress rating on the whole assembly and a ball that is retained and sealed against the housing. Confirm the cleaning method with the supplier, because a rating does not cover every chemical or high-pressure jet.

    How is a panel-mount trackball installed?

    It is fitted through a cut-out in the panel and held by a flange, nuts or clips, usually with a gasket for sealing. The cut-out size, panel thickness range and rear clearance are on the datasheet. Follow the dimensions and the stated tightening method.

    How Can We Help You?

    We're here to assist and guide you with any enquiries you may have.

    Simply complete the online form or reach out using the contact details provided below.

    Quality Refurbished Products

    Tell us what you need and how the devices will be used. Share details such as product type, quantities, condition requirements, budget, and timeframe so we can recommend the most suitable refurbished rugged solution for your application.

    Need to Recover Your Data?

    No need to panic, at Rugged we can help. Complete the online form or get in touch using the contact details below.

    How Can We Help You?

    We're here to assist and guide you with any enquiries you may have.

    Simply complete the online form or reach out using the contact details provided below.