At a glance
- OEM rugged trackballs are modules you build into your own console, keyboard or equipment, so mounting style, cut-out, seal and output are design decisions.
- Stated ingress ratings span IP40 and IP51 on encoder models, IP65 on stainless steel and panel models, and IP68 on the sealed laser and optical models.
- Sensing methods include contactless laser, infra-red optical, photo-optical encoders and mechanical.
- Ball sizes in the data include 25 mm, 38 mm, 50 mm, 57 mm and 63 mm.
- Outputs are USB and PS/2 with auto-select on many models, and TTL quadrature on some.
What is an OEM rugged trackball?
An OEM trackball is a pointing module supplied as a component. It is fitted into a keyboard, a control console or a machine fascia that you design, and it must be matched to the panel, the host and the operating environment. This guide is aimed at the design engineer or integrator. If you want the end-user view, start with industrial trackballs.
How do the mounting styles and sensing types compare?
| Option | Found in this category | Design consequence |
|---|---|---|
| Rear panel mounting | Most plastic-housed models | Fits from behind into a cut-out; needs rear clearance |
| Top mounting, snap-fit | One skeletal 50 mm model | Snaps into a flat plate or moulded panel without fasteners; sealing is defined by you |
| Front or top panel mounting | Aluminium models with switch modules | Serviceable from the front; suits consoles |
| Contactless laser or infra-red optical | IP68 models | Only the ball moves; removable top ring for cleaning |
| Photo-optical encoders | IP40 and IP51 models | Large range of ball sizes and TTL quadrature output; limited sealing |
| Mechanical ball | Stainless steel and some sealed plastic and steel models | Simple; stated IP65 |
How is the trackball sealed to your panel?
A rating on the trackball does not give a sealed product. The joint to your panel, the gasket, panel flatness and fixing torque all count. A skeletal top-mount module leaves the sealing format to the customer. Several models are described as 100% humidity tolerant only when installed correctly. Plan the sealing at design stage and read IP ratings explained. The panel mount installation guide covers thickness and clearance.
Which interface and electrical details matter?
USB and PS/2 with auto-select let one part serve several hosts. TTL quadrature gives raw X and Y pulses to your own board; the data states resolutions such as 220 or 440 pulses per revolution on one model, and 241 to 482 on another. Check supply voltage and current as well. One model adds a Z-axis control wheel around the ball. See USB, PS/2 and serial interfaces for the host side.
What about vibration, lighting and cleaning?
Aluminium models describe anti-vibration technology and EMI shielding for military, marine and aerospace use. Halo-ring and backlit variants help in low light. Removable top rings are described for cleaning and sterilisation. Marine users can read the marine and offshore hub. Each of these is a choice that changes the part, so state it in your specification.
What to check on the datasheet
- Ball diameter, material and tracking force.
- Mounting method, cut-out, panel thickness and rear depth.
- Ingress rating, with the standard and the mounting condition.
- Output type, resolution, supply voltage and current.
- Button or switch module options and their sealing.
- Operating and storage temperature.
- Cable length, connector and any custom options.
- Life, stated as ball revolutions.
What to tell us
Send the panel drawing, mounting preference, host interface, sealing target, ball size, button needs, lighting and expected volumes. Also say how long your product will stay in production, so we can discuss supply with you. Use the contact page or request a quote.
Related guides and ranges
- Industrial trackballs
- Ground control station trackballs
- OEM rugged pointing devices
- OEM and custom keyboards
- Trackball vs touchpad vs mouse
- Panel mount keyboard installation guide
Frequently asked questions
What does OEM mean for a trackball?
It means the trackball is a component for you to build into your own equipment. You define the cut-out, host interface and sealing at the panel. A finished product would normally be chosen as is.
Which trackballs in this category are sealed to IP68?
The sealed laser and optical models, and the sealed-ball model, are stated as IP68. Stainless steel and panel models are stated as IP65, and encoder models as IP40 or IP51. The rating applies only if the unit is installed as the datasheet describes.
Is a laser or optical trackball better than a mechanical one?
Contactless sensing leaves only the ball as a moving part, which reduces wear and suits frequent cleaning. Mechanical designs are simpler and are stated as IP65 here. Choose by sealing need, cleaning method and life.
Can a trackball output raw pulses to my own board?
Yes, some models offer TTL quadrature output alongside USB and PS/2. Check supply voltage, pulses per revolution and connector. Ask us if you need a particular signal arrangement.
What ball size should I specify?
Larger balls, such as 50 mm and above, are easier with gloves and long movements. Smaller balls such as 25 mm save space. Confirm the cut-out for the exact model before committing the panel design.
























