InduKey

InduKey is a German manufacturer of sealed industrial keyboards, keypads, mice, touchpads and keyboard decoders for demanding environments. The catalogue spans front-panel and modular keyboards in stainless steel, aluminium and silicone-rubber housings, many sealed to IP65 or IP68, with integrated trackballs or capacitive touchpads. Its strength is input hardware that survives moisture, dust, frequent cleaning and wide temperature swings, with several models rated from around -25C to +70C. Buyers choose InduKey for industrial HMI, machine interfacing, process control and medical workstations where a consumer keyboard would fail. Specific sealing, materials and key technology vary by model, so confirm on the product page.

InduKey seals its keyboards through fully enclosed silicone-rubber, aluminium or stainless steel construction with no exposed gaps, allowing washdown and disinfection without ingress. Several models are rated to IP65, protecting against dust and low-pressure water jets, while others reach IP68 for dust-tight and immersion-grade protection, such as the TKG-105-MED-IP68 and TKG-086-IP68-WHITE. Some variants add IK08 impact protection for vandal resistance. This sealed approach means the keyboards can be cleaned in place on a panel rather than removed, which matters in food processing, pharmaceutical and clinical settings. Exact IP and impact ratings differ between models, so always confirm the rating on the specific product page.

Yes. InduKey produces dedicated medical and hygiene-oriented models, several sealed to IP68 with antimicrobial surfaces that resist microbial growth and tolerate repeated disinfection, such as the TKG-105-MED-IP68. Smooth silicone-rubber or stainless steel surfaces with no key gaps allow thorough cleaning in place, supporting infection-control routines in hospitals, laboratories, pharmaceutical production and food preparation. Many carry CE and RoHS compliance. Wide operating temperatures, for example around -25C to +70C on the MED model, also suit cold-chain and processing areas. Antimicrobial treatment, IP rating and exact temperature range vary by model, and medical electrical certification differs across the range, so confirm the specifics on each product page.

A standard office keyboard has exposed key gaps, no ingress protection and a short service life under dust, moisture or frequent cleaning, so it fails quickly on a shop floor or in a clinical setting. InduKey keyboards are sealed to IP65 or IP68, built from silicone rubber, aluminium or stainless steel, and rated for around 2 million cycles per key, with wide operating temperatures and optional integrated trackballs or touchpads. They mount securely to panels, support washdown and offer customisable layouts and interfaces for OEM integration. The result is far lower failure and replacement cost in demanding environments. Exact ratings vary by model, so confirm on the product page.

InduKey devices appear across food and beverage processing, healthcare and medical, pharmaceutical and industrial manufacturing, with several models also suited to construction, energy, marine and offshore, and oil and gas. The common thread is environments where hygiene, washdown or ingress protection matters, such as production lines, clinical workstations and process-control panels. Sealed IP65 and IP68 models suit moisture-prone and frequently sanitised areas, while wide operating temperature ranges support both chilled and heated settings. The range covers industrial HMI, machine interfacing, quality inspection and secure access terminals. Industry suitability varies by specific model and its sealing, so check the listed industries on each product page.

Yes. Many InduKey keyboards integrate a pointing device directly into the sealed housing, removing the need for a separate mouse in confined or hygiene-critical workspaces. Options include 38mm trackballs, both mechanical and optical, and integrated capacitive touchpads with a typical active area around 59 x 42mm and resolution of roughly 100 to 300 dpi. The TKG-086-IP68-WHITE pairs an IP68 sealed keyboard with a mechanical trackball, while several TKG and TKV models combine capacitive keys with a capacitive touchpad. InduKey also supplies standalone sealed mice and touchpads such as the TKH range. The exact pointing device and its specification vary by model, so confirm on the product page.

Yes. InduKey keyboards typically offer customisation of keyboard layout, language, cable type, cable length and interface, letting integrators match a unit to a specific console, language market or host system. Variants exist for front-panel, modular and drawer mounting, with different housing materials and colours, and options such as antimicrobial surfaces, backlighting and choice of trackball or touchpad. This makes the range well suited to OEM integration where a keyboard must fit a defined panel cut-out and electrical interface. Available custom options differ between models and some changes may carry minimum quantities, so confirm the specific options and any conditions on the relevant product page.

InduKey uses several key technologies depending on the model, including capacitive keys, mechanical carbon-contact keys and the stainless steel Fit-Inox silicone keypad with carbon contacts. Capacitive and mechanical sealed models such as the TKG-105-MED-IP68 and TKG-086-IP68-WHITE are rated for approximately 2 million switching cycles per key, while certain touchpad modules are rated around 1 million operations per key. Operating force is typically between 1.5N and 3N with short key travel of about 1mm. These figures support continuous-duty industrial use. Key technology, cycle life and operating force vary by model, so confirm the figures on the specific product page before specifying.